Feb 23 18:06:55 banryu kernel: dracut: Starting plymouth daemon
Feb 23 18:06:55 banryu kernel: input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4
Feb 23 18:06:55 banryu kernel: dracut: rd_NO_DM: removing DM RAID activation
Feb 23 18:06:55 banryu kernel: dracut: rd_NO_MD: removing MD RAID activation
Feb 23 18:06:55 banryu kernel: ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
Feb 23 18:06:55 banryu kernel: ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
Feb 23 18:06:55 banryu kernel: scsi1 : ata_piix
Feb 23 18:06:55 banryu kernel: scsi2 : ata_piix
Feb 23 18:06:55 banryu kernel: ata1: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 19
Feb 23 18:06:55 banryu kernel: ata2: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 19
Feb 23 18:06:55 banryu kernel: ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
Feb 23 18:06:55 banryu kernel: ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
Feb 23 18:06:55 banryu kernel: scsi3 : ata_piix
Feb 23 18:06:55 banryu kernel: scsi4 : ata_piix
Feb 23 18:06:55 banryu kernel: ata3: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 19
Feb 23 18:06:55 banryu kernel: ata4: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 19
Feb 23 18:06:55 banryu kernel: ata3: SATA link down (SStatus 0 SControl 300)
Feb 23 18:06:55 banryu kernel: ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Feb 23 18:06:55 banryu kernel: ata4.00: ATA-8: WDC WD7502AAEX-00Y9A0, 05.01D05, max UDMA/133
Feb 23 18:06:55 banryu kernel: ata4.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 0/32)
Feb 23 18:06:55 banryu kernel: ata4.00: configured for UDMA/133
Feb 23 18:06:55 banryu kernel: ata1.00: SATA link down (SStatus 0 SControl 300)
Feb 23 18:06:55 banryu kernel: ata1.01: SATA link down (SStatus 0 SControl 300)
Feb 23 18:06:55 banryu kernel: ata2.00: SATA link down (SStatus 0 SControl 300)
Feb 23 18:06:55 banryu kernel: ata2.01: SATA link down (SStatus 0 SControl 300)
Feb 23 18:06:55 banryu kernel: scsi 4:0:0:0: Direct-Access     ATA      WDC WD7502AAEX-0 05.0 PQ: 0 ANSI: 5
Feb 23 18:06:55 banryu kernel: pata_acpi 0000:04:00.1: enabling device (0000 -> 0001)
Feb 23 18:06:55 banryu kernel: pata_acpi 0000:04:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Feb 23 18:06:55 banryu kernel: pata_acpi 0000:04:00.1: PCI INT B disabled
Feb 23 18:06:55 banryu kernel: RocketRAID 3xxx/4xxx Controller driver v1.6 (090910)
Feb 23 18:06:55 banryu kernel: hptiop 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Feb 23 18:06:55 banryu kernel: adapter at PCI 2:0:0, IRQ 16
Feb 23 18:06:55 banryu kernel: scsi 0:0:0:0: Direct-Access     Generic  STORAGE DEVICE   9317 PQ: 0 ANSI: 0
Feb 23 18:06:55 banryu kernel: scsi 0:0:0:1: Direct-Access     Generic  STORAGE DEVICE   9317 PQ: 0 ANSI: 0
Feb 23 18:06:55 banryu kernel: scsi5: firmware not ready
Feb 23 18:06:55 banryu kernel: hptiop 0000:02:00.0: PCI INT A disabled
Feb 23 18:06:55 banryu kernel: ahci 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Feb 23 18:06:55 banryu kernel: ahci 0000:04:00.0: JMB361 has only one port, port_map 0x3 -> 0x1
Feb 23 18:06:55 banryu kernel: ahci 0000:04:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x1 impl SATA mode
Feb 23 18:06:55 banryu kernel: ahci 0000:04:00.0: flags: 64bit ncq pm led clo pmp pio slum part
Feb 23 18:06:55 banryu kernel: scsi6 : ahci
Feb 23 18:06:55 banryu kernel: scsi7 : ahci
Feb 23 18:06:55 banryu kernel: ata5: SATA max UDMA/133 abar m8192@0xf7efe000 port 0xf7efe100 irq 16
Feb 23 18:06:55 banryu kernel: ata6: DUMMY
Feb 23 18:06:55 banryu kernel: ata5: SATA link down (SStatus 0 SControl 300)
Feb 23 18:06:55 banryu kernel: pata_jmicron 0000:04:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Feb 23 18:06:55 banryu kernel: scsi8 : pata_jmicron
Feb 23 18:06:55 banryu kernel: scsi9 : pata_jmicron
Feb 23 18:06:55 banryu kernel: ata7: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 17
Feb 23 18:06:55 banryu kernel: ata8: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 17
Feb 23 18:06:55 banryu kernel: ata7.01: ATAPI: HL-DT-STDVD-RAM GSA-H22N, 1.00, max UDMA/66
Feb 23 18:06:55 banryu kernel: ata7.01: configured for UDMA/66
Feb 23 18:06:55 banryu kernel: scsi 8:0:1:0: CD-ROM            HL-DT-ST DVD-RAM GSA-H22N 1.00 PQ: 0 ANSI: 5
Feb 23 18:06:55 banryu kernel: firewire_ohci 0000:05:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
Feb 23 18:06:55 banryu kernel: firewire_ohci: Added fw-ohci device 0000:05:00.0, OHCI version 1.10
Feb 23 18:06:55 banryu kernel: sd 4:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
Feb 23 18:06:55 banryu kernel: sd 4:0:0:0: [sda] Write Protect is off
Feb 23 18:06:55 banryu kernel: sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Feb 23 18:06:55 banryu kernel: sda:
Feb 23 18:06:55 banryu kernel: sd 0:0:0:0: [sdb] Attached SCSI removable disk
Feb 23 18:06:55 banryu kernel: sd 0:0:0:1: [sdc] Attached SCSI removable disk
Feb 23 18:06:55 banryu kernel: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
Feb 23 18:06:55 banryu kernel: sd 4:0:0:0: [sda] Attached SCSI disk
Feb 23 18:06:55 banryu kernel: sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Feb 23 18:06:55 banryu kernel: Uniform CD-ROM driver Revision: 3.20
Feb 23 18:06:55 banryu kernel: firewire_core: created device fw0: GUID 001e8c0000c5b729, S400
Feb 23 18:06:55 banryu kernel: kjournald starting.  Commit interval 5 seconds
Feb 23 18:06:55 banryu kernel: EXT3-fs (sda2): mounted filesystem with ordered data mode
Feb 23 18:06:55 banryu kernel: dracut: Mounted root filesystem /dev/sda2